The difference between the use of the rod with and without the eye guide
Release time:
2024-07-09
Summary
When retracting the rod after use, it must be retracted section by section from the tail section.
Use of rod without eye guide
1. Remove the bolt on the fishing rod and pull out the tip section of the fishing rod a little.
2. Take out the fishing rod section by section from the tip section, and screw it up a little at the fitting place of each two sections.
3. When retracting the rod after use, it must be retracted section by section from the tail section. When retracting the rod, both hands can be used to twist the joint of the two rods a little to make the joint loose. Then the details are included in the rough section. When receiving the pole, it must be gradually and experimentally received. It must not be received with sudden force, otherwise it may cause hand injuries. When collecting the rod, it must be gradually collected from the tail section. Otherwise, if the tip details are collected first, the details may fall into other thick sections, causing damage to the fishing rod.
Use of rod with eye guide
1. Remove the protective cap that protects the guide eye, and then pass the fishing line (bus) from the large guide eye to the middle of the small top ring guide eye.
2. The order of pulling out the fishing rod is to take out the fishing rod section by section starting from the tip section, and the fitting place of every two sections can be screwed a little to tighten it.
3. After the rod is completely pulled out, the eye guide ring should be arranged in a straight line.
4. After use, the rod should be retracted from the tail rod section by section.
More news
2024-07-09
2024-07-09
2024-07-09